{"product_id":"amazon-glue-adhesive-sds","title":"Amazon Glue \u0026 Adhesive SDS","description":"\u003cp\u003eDid Amazon flag your super glue, construction adhesive, contact cement, polyurethane foam glue, spray adhesive, or silicone sealant as hazmat and ask for a Safety Data Sheet? You have 14 business days to provide one, and adhesives are a category where the chemistry varies enormously, from inert water-based PVA to flammable solvent cements to isocyanate-containing polyurethanes now subject to new EU restrictions. Our \u003cstrong\u003eGlue \u0026amp; Adhesive SDS service\u003c\/strong\u003e delivers a compliant 16-section Safety Data Sheet built for the realities of adhesive chemistry, with accurate classification, freight-ready transport details, and the regulatory context that matters in your target markets, so you stay listed and shipping.\u003c\/p\u003e\n\u003ch2\u003eWhy Adhesives Span Every Major Hazard Class\u003c\/h2\u003e\n\u003cp\u003eAdhesives are unusual in how broadly they span the GHS hazard spectrum. Within a single product aisle on Amazon you'll find:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-based PVA and wood glues\u003c\/strong\u003e, essentially non-hazardous, often \"not classified\" against most GHS classes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-based contact cement, rubber cement, and PVC pipe cement\u003c\/strong\u003e, Category 2 or 3 flammable liquids with aspiration hazard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAerosol spray adhesives\u003c\/strong\u003e, UN1950 aerosols with flammable propellants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCyanoacrylates\u003c\/strong\u003e (super glue), with rapid skin and eye bonding, vapour irritation, and some sensitiser concerns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyurethane foaming and construction adhesives\u003c\/strong\u003e containing diisocyanates, Category 1 respiratory sensitisers, now subject to a major EU regulatory restriction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-part epoxy adhesives\u003c\/strong\u003e, Category 1 skin sensitisers, covered in detail on our dedicated Epoxy \u0026amp; UV Resin SDS page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone sealants\u003c\/strong\u003e with acetic acid release during cure (acetoxy systems) but otherwise low hazard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnaerobic threadlockers\u003c\/strong\u003e based on methacrylate chemistry, skin sensitisers, common in industrial bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe right SDS for an adhesive reflects which chemistry your specific formulation uses, not a one-size-fits-all \"adhesive\" template that overstates hazard for PVA wood glue and understates it for PU foam.\u003c\/p\u003e\n\u003ch2\u003eCategories We Author SDS For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCyanoacrylate \"super glues\"\u003c\/strong\u003e, ethyl, methyl, and butyl cyanoacrylate, including gel and liquid formulations, and the activators \/ debonders sold alongside them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-based wood, paper, and craft glues\u003c\/strong\u003e, PVA (white glue and \"yellow\" wood glue), hide glue, dextrin pastes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyurethane adhesives\u003c\/strong\u003e, foaming PU (Gorilla Glue-type), construction PU (subfloor, panel, mirror-mount), two-part PU bonding systems, and isocyanate-free MS Polymer alternatives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy adhesives\u003c\/strong\u003e, two-part syringe systems, quick-set epoxies, metal-bonding epoxies (typically also covered on our Epoxy \u0026amp; UV Resin SDS service).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-based adhesives\u003c\/strong\u003e, contact cement (Barge-type, neoprene-based), rubber cement, PVC pipe cement, ABS cement, vinyl cement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray adhesives\u003c\/strong\u003e, all-purpose spray adhesives, fabric and foam adhesives, photo-mount spray, automotive trim adhesives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot melt adhesives\u003c\/strong\u003e, EVA glue sticks, polyamide hot melts, polyolefin hot melts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction adhesives\u003c\/strong\u003e, liquid nails type acrylic\/elastomeric construction adhesives, subfloor adhesives, mirror adhesives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone sealants and adhesives\u003c\/strong\u003e, RTV silicones in both acetoxy-cure (acetic acid release) and neutral-cure formulations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnaerobic adhesives and threadlockers\u003c\/strong\u003e, methacrylate-based industrial bonding products, retaining compounds, gasket makers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialty adhesives\u003c\/strong\u003e, tile mastic, carpet and flooring adhesive, wallpaper paste, glass adhesive, leather and footwear adhesives, fabric adhesives, automotive trim adhesives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat We Classify Accurately\u003c\/h2\u003e\n\u003ch3\u003eFor each adhesive formulation, we look at:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent carrier system\u003c\/strong\u003e driving flammable-liquid category (Cat 2, 3, or 4) and aspiration hazard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAerosol category\u003c\/strong\u003e (1, 2, or 3) for pressurised products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRespiratory sensitisation\u003c\/strong\u003e, Category 1 for diisocyanate-containing polyurethanes, a documented cause of occupational asthma.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin sensitisation\u003c\/strong\u003e, Category 1 for PU, methacrylate threadlockers, and epoxy adhesives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin and eye irritation or corrosion\u003c\/strong\u003e, from amine catalysts, solvents, and curing agents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcute toxicity\u003c\/strong\u003e where actives warrant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAquatic toxicity\u003c\/strong\u003e, common for biocides in water-based products and for certain solvents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTOT-SE and STOT-RE\u003c\/strong\u003e where target-organ effects are documented (CNS effects from solvent inhalation, for example).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarcinogenicity and reproductive toxicity\u003c\/strong\u003e where specific actives warrant, formaldehyde-releasers, certain isocyanates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReactivity\u003c\/strong\u003e (Section 10), acetoxy silicone cure releasing acetic acid, anaerobic cure on metal surfaces, polyurethane moisture cure releasing CO2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePolyurethane Adhesives and Diisocyanate Restrictions: A Recent EU Regulatory Shift\u003c\/h3\u003e\n\u003cp\u003ePolyurethane adhesives, foaming PU like Gorilla Glue Original, construction PU like subfloor adhesives, and two-part industrial PU systems, contain or release diisocyanates (commonly TDI, MDI, or HDI). Diisocyanates are \u003cstrong\u003eCategory 1 respiratory sensitisers\u003c\/strong\u003e, well-documented causes of occupational asthma, and now subject to one of the most significant recent EU chemical-regulation changes.\u003c\/p\u003e\n\u003cp\u003eUnder \u003cstrong\u003eCommission Regulation (EU) 2020\/1149\u003c\/strong\u003e, which added \u003cstrong\u003eEntry 74 to Annex XVII of REACH\u003c\/strong\u003e, diisocyanates have been restricted for industrial and professional use across the EU and EEA since \u003cstrong\u003e24 August 2023\u003c\/strong\u003e. The restriction applies whenever the concentration of diisocyanates (individually or combined) is \u003cstrong\u003e0.1% or more by weight\u003c\/strong\u003e. Above that threshold, industrial or professional users must have completed training on safe use before handling the product, with training renewed at least every five years.\u003c\/p\u003e\n\u003ch3\u003eFor sellers placing diisocyanate-containing adhesives on the EU\/EEA market, two label and SDS impacts apply:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe product label must include a statement, visibly distinct from the rest of the labelling, that reads: \u003cem\u003e\"As from 24 August 2023 adequate training is required before industrial or professional use.\"\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe SDS Section 15 (Regulatory Information) needs to reference Entry 74 and the training requirement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBelow the 0.1% threshold (or for fully consumer-use products), the training requirement does not apply, but the SDS still needs to substantiate the threshold and reflect the underlying classification (respiratory and skin sensitisation, Category 1).\u003c\/p\u003e\n\u003cp\u003eWe classify your PU adhesive against Entry 74 and flag what's required, even though we don't deliver the training itself or file the regulatory paperwork. If you sell PU adhesives into Europe and your SDS doesn't reference Entry 74, it's out of date.\u003c\/p\u003e\n\u003ch2\u003eTransport Classification: Section 14\u003c\/h2\u003e\n\u003ch3\u003eAdhesive transport classification varies sharply by chemistry. Common designations:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUN1133\u003c\/strong\u003e, adhesives, flammable, the dedicated UN number for many solvent-based adhesives, contact cement, rubber cement, PVC cement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUN1950\u003c\/strong\u003e, aerosols, flammable, for spray adhesives and aerosol contact bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUN3066\u003c\/strong\u003e, paint or paint related material containing isocyanates, for some PU adhesives in coating-product form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUN1993\u003c\/strong\u003e, flammable liquid, n.o.s., for some solvent-thinned products above flammable-liquid thresholds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUN3082\u003c\/strong\u003e, environmentally hazardous substance, liquid, n.o.s., where aquatic toxicity drives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot regulated for transport\u003c\/strong\u003e, water-based PVA and wood glues, hot melt sticks, cured silicone, low-VOC construction adhesives, many cyanoacrylates, and most low-quantity consumer adhesives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGetting Section 14 right matters: over-classifying water-based PVA adds freight cost; under-classifying contact cement or PU foam gets the shipment refused.\u003c\/p\u003e\n\u003ch2\u003eWhere SDS Fits Among Other Adhesive Regulations\u003c\/h2\u003e\n\u003cp\u003eAdhesives intersect with several regulatory frameworks the SDS doesn't replace. Depending on what you sell and where, you may need to consider:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEU REACH Annex XVII Entry 74\u003c\/strong\u003e for diisocyanate-containing PU adhesives (covered above).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Air Resources Board (CARB)\u003c\/strong\u003e Consumer Products Regulation, with VOC limits applied to consumer adhesive categories sold in California.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Proposition 65\u003c\/strong\u003e, warnings for products containing listed chemicals (toluene, methylene chloride in historical formulations, certain plasticisers).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPSIA 2008\u003c\/strong\u003e, lead and phthalate limits for adhesives sold for children's products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLHAMA \/ ASTM D-4236\u003c\/strong\u003e, for adhesives marketed as art or craft materials, toxicologist review and conformance statement on label.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSHA HazCom 2024\u003c\/strong\u003e, US workplace hazard communication, with PEL and STEL considerations for solvent vapours and isocyanate exposures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNone of these frameworks is done by the SDS, and we do not author them. What we produce is the hazard-communication document Amazon, freight, OSHA workplace customers, and your downstream supply chain ask for. The SDS sits alongside your other compliance work, not in place of it.\u003c\/p\u003e\n\u003ch2\u003eWhat You Get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA complete, \u003cstrong\u003e16-section Safety Data Sheet\u003c\/strong\u003e authored to the regulations of the market you sell into (US OSHA HazCom 2024, EU REACH\/CLP, UK, Canada, or Australia).\u003c\/li\u003e\n\u003cli\u003eAccurate hazard classification for your specific chemistry, water-based, solvent-based, cyanoacrylate, polyurethane, epoxy, silicone, or anaerobic.\u003c\/li\u003e\n\u003cli\u003eEU diisocyanate-restriction (Entry 74) referencing in Section 15 where applicable, so PU adhesives sold into the EU are documented correctly.\u003c\/li\u003e\n\u003cli\u003eCorrect \u003cstrong\u003eSection 14 transport classification\u003c\/strong\u003e with UN number, proper shipping name, packing group, and class, or \"not regulated\" where that applies.\u003c\/li\u003e\n\u003cli\u003eYour \u003cstrong\u003eproduct and brand name matched to your Amazon listing\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eA clean, print-ready PDF, ready to upload to Amazon Seller Central or share with freight forwarders.\u003c\/li\u003e\n\u003cli\u003eStandard, fast, or 24-hour priority turnaround.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eAdhesive brands and sellers on Amazon, super-glue and cyanoacrylate brands, construction adhesive sellers, polyurethane foam-glue manufacturers, contact-cement and solvent-adhesive brands, spray-adhesive sellers, silicone sealant brands, industrial threadlocker manufacturers, private-label adhesive sellers, and importers moving adhesive products into the US, EU, UK, Canada, or Australia.\u003c\/p\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePlace your order and send us your product details, full formulation (or supplier-issued raw SDS where available), format, and target markets.\u003c\/li\u003e\n\u003cli\u003eWe classify the hazards and transport designation under the rules of your target market, then author your SDS, with appropriate Entry 74 reference for diisocyanate-containing products sold into Europe.\u003c\/li\u003e\n\u003cli\u003eYou receive a print-ready PDF, matched to your listing, ready to upload to Amazon and hand to freight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv style=\"background: #f2f4f8; border-left: 4px solid #c2410c; padding: 16px 20px; margin: 28px 0;\"\u003e\n\u003cstrong\u003eAmazon asking for an SDS in 14 business days?\u003c\/strong\u003e Choose the 24-hour priority turnaround and we'll have your Glue \u0026amp; Adhesive SDS in your hands the next business day, calibrated to your specific chemistry (not over-flagged for water-based glue, not under-flagged for PU foam or contact cement), so the listing doesn't stay suppressed.\u003c\/div\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eDoes my water-based PVA wood glue really need an SDS?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eFor Amazon's hazmat review and OSHA workplace use, yes, if you've been asked. The SDS for water-based PVA typically shows \"not classified\" against most GHS hazard classes, which is exactly what Amazon's review is looking for. The document still needs to be a real, fully populated 16-section SDS, but it reflects the honest reality that the product is largely benign.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat is the EU diisocyanate training requirement and does it apply to my product?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eUnder \u003cstrong\u003eREACH Annex XVII Entry 74\u003c\/strong\u003e (in force since 24 August 2023), industrial and professional users in the EU\/EEA who handle products containing 0.1% or more diisocyanates must complete safe-use training before use, with training renewed every five years. Your product is affected if it contains MDI, TDI, HDI, or other diisocyanates above 0.1% by weight, common in PU foaming glues, construction PU, and two-part PU bonding systems. The product label must carry a specific training-required statement, and the SDS Section 15 needs to reference Entry 74. We surface this on the SDS where it applies.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy is super glue (cyanoacrylate) often flagged on Amazon?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eBecause of its specific hazards: rapid skin and eye bonding (mechanical\/medical hazard rather than chemical toxicity), vapour irritation that can be significant in unventilated environments, and some sensitisation concerns from cyanoacrylate vapours. Most cyanoacrylates classify with skin and eye irritation and STOT-SE Category 3 for respiratory irritation. The transport designation is often \"not regulated,\" but Amazon's hazmat review may still ask for documentation, and the SDS provides it.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eIs the SDS the same as CARB VOC compliance for adhesives sold in California?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eNo. CARB's Consumer Products Regulation sets VOC limits for adhesive product categories sold in California (different categories have different limits), and compliance is documented through formulation records and the product label, not the SDS. The SDS may reference VOC content in Section 9 (Physical and Chemical Properties), but it doesn't constitute CARB compliance. You need both.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCan the same SDS work for multiple adhesive SKUs in my range?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eGenerally no. Different chemistries (water-based vs. solvent vs. PU vs. epoxy vs. silicone), different format (liquid vs. aerosol vs. cartridge vs. tube), and different concentrations of reactive components each affect hazard classification, transport designation, and SDS content. Each product typically needs its own sheet.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDo you also cover EU, UK, Canada, and Australia?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYes. Tell us which markets you sell into and we will author for each one, US OSHA HazCom 2024, EU REACH\/CLP (with Entry 74 referencing where it applies), UK REACH and GB CLP (UK has its own version of the diisocyanate restriction), Canada's Amended HPR (WHMIS), or Australia's WHS Regulations. Our Multi-Region SDS Package covers SDS for several markets in a single order.\u003c\/p\u003e\n\u003cp style=\"border-top: 2px solid #c2410c; padding-top: 14px; margin-top: 28px; font-style: italic;\"\u003eAdd the Glue \u0026amp; Adhesive SDS to your cart and choose your turnaround, or \u003ca href=\"https:\/\/safetydatasheetpro.com\/pages\/contact\" rel=\"noopener\" target=\"_blank\"\u003econtact us\u003c\/a\u003e with your product details, we'll classify the chemistry accurately, surface any Entry 74 considerations for PU products, and have your SDS ready for Amazon review and freight booking.\u003c\/p\u003e","brand":"Phoenix Safety Consultants LLC","offers":[{"title":"Standard Delivery (72 Hours)","offer_id":56549794611366,"sku":null,"price":27.0,"currency_code":"GBP","in_stock":true},{"title":"Fast Delivery (48 Hours)","offer_id":56549794644134,"sku":null,"price":35.0,"currency_code":"GBP","in_stock":true},{"title":"Priority Delivery (24 Hours) 🚀","offer_id":56549794676902,"sku":null,"price":42.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8695\/1846\/files\/AmazonGlue_AdhesiveSafetyDataSheet.webp?v=1780177740","url":"https:\/\/safetydatasheetpro.com\/products\/amazon-glue-adhesive-sds","provider":"Safety Data Sheet Specialist","version":"1.0","type":"link"}